Ключевые слова: rotating machines, HTS, Bi2223, tapes, rotors, efficiency, torque, measurement setup, design parameters, modeling, power reactive, power active, loads, test results
Ключевые слова: rotating machines, motors synchronous, design parameters, HTS, stators, Bi2223, tapes, winding configurations, comparison, modeling, rotating characteristics, torque, flux density, distribution
Ключевые слова: rotating machines, motors synchronous, impedance, loads, stators, rotors, design, HTS, Bi2223, tapes, coils toroidal, ac losses, frequency dependence, inductance, fabrication, design parameters, torque, efficiency, test results, nonlinear effects
Ключевые слова: HTS, EuBCO, bulk, rings, reinforcement, magnetization, trapped field, experimental devices, numerical analysis
Furuse M., Nakamura T., Itoh Y., Fukui S., Yoshikawa M., Ikeda K., Terazawa T., Nishino R., Ogasa T., Karashima T.
Ключевые слова: rotating machines, motors, HTS, Bi2223, tapes, rotors, stators, nitrogen liquid , design, fabrication, test results, design parameters
Ключевые слова: rotating machines, HTS, Bi2223, tapes, stators, coils, dc performance, ac performance, transport currents, motors synchronous, rings, winding configurations, design, design parameters, fabrication, torque, critical caracteristics, current-voltage characteristics, ac losses, experimental results
Ключевые слова: rotating machines, motors synchronous, HTS, Bi2223, tapes, transporter, rotational speed, control systems, prototype, fabrication, design parameters, test results
Ключевые слова: HTS, REBCO, bulk, rings, disks, reinforcement, stainless steel, width, mechanical properties, stress effects, thermal stress, magnetization, numerical analysis, trapped field magnets
Ключевые слова: HTS, EuBCO, bulk, rings, reinforcement, stainless steel, magnetization, mechanical properties, fracture behavior, trapped field, stress effects, cooling technology, numerical analysis, critical caracteristics, Jc/B curves, trapped field distribution, current density, distribution, experimental results
Ключевые слова: HTS, GdBCO, bulk, rings, pulsed magnetization, trapped field, mechanical properties, fracture behavior, stress effects, magnetization curves, experimental results
Sato Y., Takahashi H., Satoh H., Kato K., Watanabe H., Satoh Y., Takasaki M., Saitoh Y., Tanaka K.H., Hirose E., Agari K., Ieiri M., Katoh Y., Minakawa M., Mutoh R., Sawada S., Toyoda A., Yamanoi Y., Yahata K.
Ключевые слова: magnetic systems, irradiation effects, insulating medium
Ключевые слова: rotating machines, motors, rotating characteristics, HTS, transient performance, rotors, DI-Bi2223, fabrication, prototype, experimental results
Amemiya N., Furuse M., Nakamura T., Itoh Y., Fukui S., Ohashi Y., Yoshikawa M., Nishimura T., Ogasa T.
Ключевые слова: rotating machines, HTS, Bi2223, tapes, rotors, torque, design parameters, fabrication, test results, cryogenic systems, cryostat
Ключевые слова: NMR magnet, trapped field, homogeneity, HTS, cylinders, REBCO, numerical analysis
Ключевые слова: rotating machines, vehicle applications, motors synchronous, torque, density, HTS, bulk, REBCO, rotors, flux density, DI-Bi2223/Ag, tapes, winding configurations, test results, reluctance
Ключевые слова: rotating machines, HTS, motors synchronous, torque, numerical analysis, design parameters
Ключевые слова: rotating machines, motors, HTS, efficiency, design, fabrication, DI-Bi2223, modeling, numerical analysis
Ключевые слова: HTS, bulk, magnets, REBCO, measurement technique, MRI magnets, magnetization, magnetic field distribution, resonance effects
Ключевые слова: HTS, bulk, REBCO, trapped field distribution, conduction cooled systems, magnetization, magnets permanent, experimental results
Ключевые слова: HTS, magnets, bulk, magnetization, magnets permanent, numerical analysis, trapped field distribution, experimental results, comparison
Ключевые слова: HTS, REBCO, bulk, plates, irreversibility line, pulsed magnetization, resistivity, trapped field, temperature dependence, experimental results
Ключевые слова: HTS, bulk, magnets, conduction cooled systems, REBCO, trapped field distribution, magnetization, experimental results
Amemiya N., Osamura K., Nakamura T., Itoh Y., Yamada Y., Nagao K., Nishimura T., Matsumura K., Terazawa T.
Ключевые слова: motors synchronous, HTS, rotating machines, torque, Bi2223/Ag, design parameters, design, test results
Honjo S., Masuda T., Watanabe M., Yumura H., Kitoh Y., Hara T., Mimura T., Noguchi Y., Ikeuchi M., Yaguchi H.
Ключевые слова: Japan, review, cables, power transmission lines, power equipment, cables three-in-one, design parameters, ac losses, experimental results, test results, status
Honjo S., Masuda T., Watanabe M., Yumura H., Kitoh Y., Ashibe Y., Ohya M., Ito H., Mimura T., Minamino T., Noguchi Y.
Ключевые слова: HTS, power equipment, cables three-in-one, DI-Bi2223, installation, fault currents, termination, joints, test long-term operation
Honjo S., Masuda T., Watanabe M., Yumura H., Kitoh Y., Ashibe Y., Ohya M., Mimura T., Minamino T., Noguchi Y.
Ключевые слова: HTS, REBCO, bulk, trapped field, gradient, pulsed magnetization, disks, measurement setup, trapped field distribution, temperature rise , time evolution, experimental results
Honjo S., Masuda T., Watanabe M., Yumura H., Kitoh Y., Mimura T., Noguchi Y., Ikeuchi M., Yaguchi H.
Ключевые слова: Japan, cables, review, power equipment, power transmission lines, test results, fault currents, cables three-in-one, ac losses, status
Honjo S., Masuda T., Watanabe M., Yumura H., Kitoh Y., Ashibe Y., Ohya M., Mimura T., Minamino T., Noguchi Y.
Honjo S., Masuda T., Watanabe M., Yumura H., Kitoh Y., Ashibe Y., Ohya M., YATSUKA K., Itoh H., Mimura T., Noguchi Y.
Ключевые слова: HTS, REBCO, bulk, trapped field, trapped field, pulsed magnetization, experimental results, magnetic properties
Ключевые слова: HTS, REBCO, bulk, disks, trapped field, trapped field distribution, experimental results, magnetic properties
Ключевые слова: HTS, DI-Bi2223, cables three-in-one, fault currents, short circuit test, design parameters, experimental results, power equipment, new
Ogawa J., Itoh Y., Fukui S., Tanaka K., Sato T., Oka T., Kanayama H., Ooizumi M., Terasawa T., Yabuno R.
Ключевые слова: HTS, bulk, magnetic separation, REBCO, fabrication, magnetic field distribution, experimental results
Ключевые слова: HTS, bulk, magnets, magnetic separation, trapped field, REBCO, magnetic field distribution, test results, magnetic properties
Izumi T., Shiohara Y., Yamada Y., Sutoh Y., Matsuda J.S., Nakaoka K., Kitoh Y., Yoshizumi M., Nalkanishi T.
Ключевые слова: HTS, YBCO, coated conductors, TFA-MOD process, review, critical current, thickness dependence, composition, homogeneity, humidity, fabrication, critical caracteristics
Saitoh T., Izumi T., Shiohara Y., Yamada Y., Sutoh Y., Matsuda J., Yajima A., Nakaoka K., Kitoh Y., Yoshizumi M., Suzuki K., Nakai A., Nakanishi T.
Ключевые слова: HTS, YBCO, coated conductors, TFA-MOD process, long conductors, critical current, thickness dependence, composition, Jc/B curves, review, fabrication, critical caracteristics, review
Goto T., Izumi T., Shiohara Y., Yamada Y., Sutoh Y., Matsuda J., Yajima A., Nakaoka K., Kitoh Y., Yoshizumi M., Nakanishi T.
Izumi T., Shiohara Y., Yamada Y., Sutoh Y., Matsuda J., Yajima A., Machi T., Nakaoka K., Kitoh Y., Yoshizumi M., Suzuki K., Nakai A., Nakanishi T.
Ключевые слова: HTS, YBCO, REBCO, coated conductors, composition, Jc/B curves, TFA-MOD process, pinning centers, IBAD process, fabrication, critical caracteristics
Saitoh T., Izumi T., Shiohara Y., Yamada Y., Sutoh Y., Miyata S., Matsuda J., Nakaoka K., Kitoh Y., Yoshizumi M., Nakai A., Nakanishi T.
Ключевые слова: HTS, coated conductors, substrate Ni-W, buffer layers, PLD process, fabrication, texture, YBCO
Ключевые слова: patents, pulsed magnetization, coils, HTS, bulk, trapped field, design, power equipment, magnetic properties
Fuji H., Izumi T., Shiohara Y., Aoki Y., Yamada Y., Matsuda J., Yajima A., Teranishi R.(teranishi@istec.or.jp), Nakaoka K., Kitoh Y., Nomoto S., Suzuki K.
Ключевые слова: HTS, YBCO, coated conductors, TFA-MOD process, review, fabrication
Izumi T., Shiohara Y., Yamada Y., Sutoh Y., Matsuda J., Machi T., Nakaoka K., Kitoh Y., Yoshizumi M., Suzuki K., Nakai A., Nakanishi T.
Ключевые слова: HTS, coated conductors, YBCO, YBCO, IBAD process, PLD process, TFA-MOD process, Jc/B curves, fabrication, critical caracteristics
Ключевые слова: HTS, coated conductors, review, YBCO, PLD process, MOCVD process, TFA-MOD process, IBAD process, long conductors, fabrication
Teranishi R., Fuji H., Aoki Y., Izumi T.(izumi@istec.or.jp), Yamada Y., Matsuda J., Yajima A., Nakaoka K., Kitoh Y., Nomoto S.
Ключевые слова: HTS, coated conductors, TFA-MOD process, long conductors, review, YBCO, critical current, thickness dependence, Jc/B curves, fabrication, critical caracteristics
Teranishi R., Fuji H., Izumi T., Shiohara Y., Miyata S., Nakaoka K., Kitoh Y., Aoki Y.(y-aoki@istec.or.jp), Nomoto S., Matuda J.
Muroga T., Fuji H., Izumi T., Watanabe T., Yamada Y., Miyata S., Konishi M., Machi T., Ibi A., Kitoh Y., Nakao K.(nakao@istec.or.jp), Aokia Y., Shioharaa Y.
Ключевые слова: HTS, coated conductors, long conductors, YBCO, current distribution, Hall sensor, measurement technique
Fuji H., Izumi T., Aoki Y., Yamada Y.(yamada@istec.or.jp), Nakao K., Chikumoto N., Ibi A., Kitoh Y., Machi T.(machi@istec.or.jp)
Ключевые слова: HTS, coated conductors, long conductors, optical imaging, measurement technique, length
Ключевые слова: HTS, REBCO, bulk, magnets, magnetron sputtering, trapped field, magnetic field distribution, power equipment, magnetic properties
Itoh Y., Yamada T., Mizutani U., Yanagi Y., Ikuta H.(ikuta@nuap.nagoya-u.ac.jp), Yoshikawa M., Latha B.
Yanagi Y.(yanagi@ai-i.aisin.co.jp), Matsuda T., Hazama H., Yokouchi K., Yoshikawa M., Itoh Y., Oka T., Ikuta H., Mizutani U.
Teranishi R., Tokunaga Y., Fuji H., Izumi T., Shiohara Y., Nakaoka K., Kitoh Y., Aoki Y.(y-aoki@istec.or.jp), Koyama T., Matuda J.S.
Ключевые слова: HTS, YBCO, coated conductors, reel-to-reel process, TFA-MOD process, current distribution, fabrication
Fuji H., Izumi T., Shiohara Y., Aoki Y., Yamada Y., Matsuda J., Yajima A., Teranishi R.(teranishi@istec.or.jp), Nakaoka K., Kitoh Y., Nomoto S.
Tokunaga Y., Izumi T., Aoki Y., Hirabayashi I., Chikumoto N., Matsuda J., Kitoh Y., Machi T.(machi@istec.or.jp)
Ключевые слова: HTS, YBCO, coated conductors, TFA-MOD process, optical imaging, defects, experimental results, fabrication
Iijima Y., Goto T., Saitoh T., Teranishi R., Fuji H., Izumi T., Shiohara Y., Aoki Y., Yamada Y., Matsuda J., Yajima A., Yoshinaka A., Nakaoka K., Kitoh Y.
Ключевые слова: HTS, bulk, stress distribution, magnetization, trapped field, numerical analysis, magnetic properties
Itoh Y., Oka T., Mizutani U., Ikuta H., Yoshikawa M., Yanagi Y.(yanagi@ai-i.aisin.co.jp)
Itoh Y., Mizutani U., Yanagi Y., Ikuta H.(ikuta@nuap.nagoya-u.ac.jp), Yoshikawa M., Iwasaki T.
Ключевые слова: HTS, REBCO, bulk, fabrication, pinning, Jc/B curves, peak effect, trapped field distribution, experimental results, critical caracteristics, magnetic properties
Koshizuka N.(koshizuka@istec.or.jp), Ishikawa F., Nasu H., Murakami M., Matsunaga K., Saito S., Saito O., Nakamura Y., Yamamoto H., Takahata R., Itoh Y., Ikezawa H., Tomita M. .
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.